Plus
- Cast iron extensions are very durable
- The 2 HP engine can be driven by almost anything.
- Includes play-free and dado bets.
Whereas
- The play-free insert is free and swaying.
- Crane rails for table extension undrilled on the right side.
- A neglected and poorly attached mitrometer
Introduction
A good table saw is every carpenter’s best friend, both professional and amateur. Although we dream of a fully functional cabinet saw, sometimes it’s just not an option. Whether it concerns space or the location of your workshop, it is forbidden to install a hacksaw. In such situations, a good contractor’s saw can often be a good replacement for a contractor’s saw. The contractor who has seen the Grizzly G0661 is an excellent choice in this respect, as you can see in our report.
What’s in box?
This saw table with the frame comes almost completely disassembled, so I’m not going through the parts of what you’ll find in the box as usual. I’ll just summarize the contents:
- A grizzly bear businessman saw G0661 (Link to Amazon)
- Support for table saw (disassembled)
- Sliding wings
- Level view
- Push stick
- Bladder Wrench (2)
- Banister
- 10-inch carbide serrated disc
- Installation aids
- User manual
Is it difficult to assemble a Grizzly G0661?
It’s a light assembly saw if you’re not in a hurry. The table saw itself is almost completely assembled directly from the box of the Grizzly 
, only the blade and the attachment of the rivet blade and the handwheels are needed. The stand, on the other hand, requires complete assembly.
It took about an hour before this table was fully assembled and ready for use. When everything was put together, it was time to check the alignment of the fence and the blade. Make sure you don’t miss this step, because my table saw didn’t die right after I unpacked it. Use the saw alignment tool to check the accuracy of the saw blade and fence and take your time for this task. In the Grizzly G0661 it took me about an hour to set it to zero, but once I reached the accuracy, it held the whole mission.
What are the best features of the Grizzly G0661?
Although this certainly makes it heavy, my favourite feature of the G0661 Grizzly is the where the table saw and extension are made entirely of cast iron. Feel it get stuck and the extension cord won’t come back even if I tear a very heavy tree.
The2HP engine is also a good feature because it is described as an improvement over my last table saw engine. With this circular saw I could cut through everything that came through my head and I could look through the butter like a hot knife. The Grizzly is a great car, well designed and powerful.
Finally, I really appreciate that the board saw that the actually contains adado insert, because the need to buy or build is usually a pain in the back. The zero play of the insole is a terrible quality, but the dado insole is quite good and has withstood a lot of use and abuse.
What is the length of the Grizzly G0661?
Because this canteen saw is made of cast iron, it was built to the end. The engine is also powerful and has been running smoothly for some time. The engine is constantly sealed and lubricated, so you don’t have to worry about what might get stuck inside.
The table saw stand is stable and sturdy and holds the saw firmly, no matter what you throw at it. I have seen the grizzly saws that have been used for years without any problems, and everything points to the fact that these canteen saws will be among the durable grizzly bears that will be my partner in carpentry all my life.
Grizzly G0661 easy to use ?
On the Grizzly everything is neatly arranged, from the on/off switch to the folding knife. I especially like the 
, because the rivet blade can quickly be replaced by a blade protector when changing.
The biggest problem with this table saw is the mitrometer. As for the cost of the saw, I didn’t expect to have to rebuild or replace the mitrometer, but that’s exactly what I had to do. The included mitrometer is free and oscillates in the groove, with too much play to be accurate. It is also too easy to drop the tab button of the desired value without knowing it, so I messed up a few pieces of the tree by mixing up the wrong tab value.
Another problem is the play-free operation, because it is made of a material of poor quality that simply cannot withstand as much use and abuse as the saw itself. The T20818 zero splitting device is ideally suited for this purpose and is an excellent investment to extend the life of the saw.
What is the warranty on the Grizzly G0661?
The Grizzly G0661 has a one-year warranty, which slightly reduces the cost and quality of the table saw. I’ve had no problems with mine, except ZCI, but I don’t know why the warranty period for an expensive contractor’s saw is so short. However, Grizzly’s customer service is very friendly and accommodating and can certainly explain how to use your circular saw correctly and safely.
Grizzly G0661 Summary
The Grizzly G0661 is not without problems, but it is a very respectable table saw that should give you years of use. The features are easy to use and offer more than enough cutting power for almost any type of wood you can throw. I strongly recommend this saw as a replacement for a cabinet saw if you want something more portable or if you simply cannot install a cabinet saw. If you are interested, take a look at the price of the Grizzly G0661 table saw on Amazon.com.
grizzly g0661 for sale,grizzly g0869 reviews,grizzly g0870 review,grizzly table saw,grizzly portable table saw review,grizzly go576,grizzly benchtop table saw,grizzly table saw fence
Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.